There is total confusion among the general populace in relation to the alcohol
content in beer. Following is a brief discussion, attempting to clarify
some of the confusion.
In the U.S. the alcohol content of beer is frequently indicated by weight
while wine is usually indicated by volume. The Bureau of Alcohol, Tobacco
and Firearms (BATF) uses the weight measurement, and we often hear about
3.2 beer which is by weight, which equates to approximately 4% by volume.*
As a guideline, typical American beers (lagers) are generally 3.6 to 3.8%
by weight (approx. 4.5 to 4.7 by volume), although, as mentioned, some states
mandate a 3.2 beer by weight (4% by volume). A "light" beer, on
the other hand, is between 2.3 and 3.2% by weight (2.8 - 4% by volume).
In California any beer over 3.99% alcohol by weight may not be called "beer,"
but must be called "Malt Liquor, Ale, Stout or Porter." (All beers
are brewed from malt, and hence this distinction is simply a matter of alcohol
content.)
According to the beer expert Michael Jackson (I've never heard him sing),
most American malt liquors are not necessarily the finest quality beers,
but rather those produced quickly to emphasize the alcohol content, and
to produce a "kick," although in some states it is watered down.
Utah, for example mandates a malt liquor as 3.2 by weight (4% by volume).
From here on, the percentage stated will be "by weight" with the
"by volume" in parentheses unless otherwise stated.
Since the terms lager, ale and stout do not use the word "beer,"
their alcohol content is initially impossible to estimate.** However, the
shocker is that many British lagers are only 2.6 -3.2 (3.2 - 3.9% by volume),
and British bitters, porters, and stouts are generally 2.8 - 3.2 (3.5 -
4% by volume) while British premium lagers and British special bitters are
3.2 - 3.9. No wonder Britain is noted for its phenominal consumption of
beer; at that strength one can consume a good many "pints" in
a social atmosphere without being totally inebriated.
The myths of German-Austrian beers are equally as shocking. Many German
beers are classified as "malt liquor" as they generally range
from 4% (approx. 5% alcohol by volume). But a typical "Vollbier"
(full beer) is between 3.5 and 4.5%; consequently either a "beer,"
or a "malt liquor." An example is the Austrian Zipfer Vollbier
which is 4.1% (5.2% by volume). Here we should attempt to refer to north
vs. south German styles. The north-Germans state emphatically that south-German,
for example Munich, beers are much weaker. A normal Munich "Helles"
(lager) is 3.5 - 3.9%, while a Cologne "Kölsch," Düsseldorfer
"Alt," and a Dortmunder is between 3.5 and 4%. However, the south-German
Märzen (Oktoberfest beer) is 4.4 - 4.6 by weight (5.5 - 5.7 by volume)
, and a "Fastenbier" (lenten beer) such as Optimator (or any beer
name ending in "ator") is 5.4 - 7 (6.8 - 8.75 by volume), not
to mention the notorious Swiss Samichlaus (14.9% by volume). Not a fair
example, but the famous Berliner Weissbier is 2 - 3.2.% (2.5 - 4% by volume),
weak but with a touch of syrup, refreshing on a warm summer day in Berlin.
In summary, any imported "malt liquor" is fairly potent, over
4%. However, if an import uses the word "beer" anywhere on its
label, then it is not as potent, i.e.: under 4%, and it is in the category,
alcohol -wise, of an American beer (lager) But beware the terminology "lager,"
"ale," stout," etc. While, as noted, many are also low in
alcohol content, they may be potent since they do not use the terminology
"beer," and hence do not have to be called a "malt liquor."
As an example, U.S. premium ales and premium pale ales are generally 4.25
- 4.5% (5.3 - 5.6 by volume), and some export Stouts can be 4.4 - 5.9% (5.5
- 7.4 by volume).
Belgium ales, and lambics, which have gained considerable attention recently
should also be briefly considered. Corsendonk Monk's Brown and Pale ale
have an alcohol content between 5.9 and 6.11 (7.5 and 7.8% by volume) while
a Liefmans Kriekbier is 6.22 (7.93 by volume).
Bavarian-Austrian Weizenbiere form the other significant latest "craze,"
and, for example, Edelweiss (Kristallklar, Hefetrüb, and Dunkel) have
been analyzed by BATF to have an alcohol content of 4.2% (5.24 by volume).
The brewery in Kaltenhausen analyzed Edelweiss as approximately 5.4% by
volume. However, the official certification from the Brau A.G. for Edelweiss
lists Edelweiss Hefetrüb, and Edelweiss Kristallklar at 5.74%, and
Edelweiss Dunkel at 5.87% alcohol by volume.***
If you are in the mood to digest some of these figures, then you will have
a general guideline to alcohol content in beer, possibly better than the
analogy, a shot, a glass of wine, and a beer are the same in alcohol. However,
considering our concern with drinking and driving, would it not be responsible
to be allowed to include the alcohol content on each bottle of beer, malt
liquor, ale, stout and lager, and drink intelligently?
*The percentages of alcohol were taken from Michael Jackson's World Guide
to Beer, Exeter Books, New York,1984.
**To help with the terminolgy lager and ale, a lager is bottom-fermented
as a south-German "Helles," while an ale is top-fermented, simply
a different brewing process.
*** Such analyses can vary slightly with each batch of beer, and hence are
only a approximate statement of alcohol content. However, this official
certification, signed and stamped must be considered as valid.
A few examples of the alcohol content by volume in German beers as verified
by PA in Berlin - hard day's work!
Beck's - 4.7%; Warsteiner - 4.8%; Jever - 4.9%; Gleumes - 4.9%;
Schultheiss - 5 %; Berliner Kindl - 5.1%; Zipfer - 5.2%.
Pa's Home Page
Austrian Beer Articles